This Fluence dimmer allows growers to easily control the light intensity of their Fluence fixture via an easy-to-use up/down arrow function. It clearly shows the user their light output on a digital display.
The Fluence dimmer connects to each Fluence fixture via a 3.5mm jack or pigtail leads through an adjustable PWM or 0-10V signal switch. Up to 50 fixtures (not to exceed 200 feet of signal wire) can be daisy chained off of a single dimmer. Additional signal cables to connect multiple fixtures may be needed and are not included.
Extending the signal wire more than 200 feet will weaken the signal strength. This may reduce the total number of fixtures that can be dimmed. If more than 200 feet of total signal wire is needed, please consult your electrician.
A battery-backup ensures light levels are maintained in the event of a brief power outage to the dimmer.
This dimmer should be installed away from wet environments and areas likely to be splashed with water, and always dry hands thoroughly before using. Do not install this dimmer in environments with 80%+ humidity.
Please note: This Fluence dimmer is meant to control the overall light intensity of your Fluence Bioengineering fixture(s). It is not meant to act as a timer to control photoperiod. For photoperiod control, it is best to use a switch or timer to power fixtures on/off.
- PWM Dimming Signal: 0-100% +/- 1% Source/Sink: 40mA DC
- 0-10V Dimming Voltage: 0-10V +/- .1V Source/Sink: 40mA DC
- Backup Battery LiPo: 600mA (Fully Charged)
- USB Charger Input: 120V AC Power Output: 5V at 300mA
Which Version Should I Choose?
If you are purchasing this dimmer to control VYPR or RAZR fixtures you should select the “Pigtails” option.
If you are purchasing this dimmer to control SPYDR or RAY fixtures , please consult the chart below to select the proper connector.
|VYPR & RAZR||After 12-01-15||Pigtails|
|SPYDR||Before 11-01-17||3.5mm AUX|
|RAY||Before 12-01-17||3.5mm AUX|